Application:
ASTM D86 Automated Distillation Tester is applied to determine atmospheric distillation of petroleum products by adopting a laboratory batch distillation device to measure their the boiling range characteristics quantitatively.
Labtech can provide Automatic Distillation Test Equipment with different types to test one sample or two samples at the same time.
Test Standard:
ASTM D86
Specification:
| Model | R-SY-6536ZD | R-SY-6536ZDS |
| Temperature measurement range | R.T. to +400℃ |
| Temperature accuracy | ±0.1℃ |
| Heat way | Quartz heating tube |
| Control way | LCD Touch Screen |
| Cooling way | Compressor |
| Sample volume range | 0-100ml | 0-100ml for one pipe |
| Volume resolution | 0.1ml |
| Distillation rate | 4~5 ml /min (Auto-adjust) |
| Condenser pipe | Single | Double (can do separate test or comparison test) |
| Print | Built-in printer |
| Power | 1-PH, 220V, 50Hz |
| Accessories list | 125mL distillation flask: 1pc 100mL receiver cylinder:1pc Measuring Cylinder: 2pcs Guide Vane: 2pcs Port cover: 1pc Heating furnace support plate: 1set silica gel plug: 1pc Sensor Rubber Block: 1pc Nitrogen Pipe: 1pc Drainage Pipe: 1pc Printer Paper: 1roll Fuse 20A: 2pcs Power wire: 1pc English manual: 1pc |
Features:
1. Automatic control throughout test procedures; Temperature control, sample volume tracking, real-time temperature recording and test results saving are performed automatically.
2. 10 Inch high-definition touch screen LCD display, Chinese/English user HMI.
3. Brand-new sample volume tracking system utilizes high precision step motor to drive ball round circular positioning screw and linear laser tracker to achieve precision measurement. Automatic detection of sample recovery volume.
4. After test, sample level tracking system automatically returns to the “0mL” position.
5. Imported Danfoss compressor for condenser tube and recovery room refrigeration.
6. This instrument is equipped with flame detector with automatic fire extinguishing function. It features temperature, volume and atmospheric pressure correction functions.
7. Automatic control of distillation rate and automatic final boiling point detection.
8. Heating rate settings can be recalled at any time according to sample type to ensure required distillation rate.
9. It is equipped with residue volume input function.
10. The instrument displays and prints IBP, temperature/5%, distillation time, FBP in real time.
